EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Charge Controller is often a extremely productive photo voltaic controller created for off-grid photo voltaic units. Depending on multiphase synchronous rectification technological know-how, it ensures optimized energy conversion and procedure balance for a wide array of photovoltaic (PV) apps.
Critical Options of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller technological know-how for top-quality photo voltaic energy harvesting. Key attributes consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Innovative MPPT Algorithm with >99% effectiveness.
Twin-Stage Charging for Increased battery lifetime.
Liquid crystal display Display with genuine-time info monitoring.
Numerous Load Manage Modes which includes manual and timer.
Complete Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Step Guideline to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all parts are included: Tracer AN device, temperature sensor, interaction cables, and person guide.
Verify the model number and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller utilizing the delivered mounting brackets.
Manage right clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Warning: Always adhere to correct protection protocols and make sure the program is powered off before connecting factors.
Action 1: Connect the battery terminals into the demand controller (constructive to optimistic, negative to destructive).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Move three: Connect the load terminals if employing a immediate load connection.
Move four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Electric power within the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Facts Read more Logging
The Tracer AN Sequence supports real-time monitoring using the MT50 distant meter.
Information is usually logged by means of the RS485 communication port applying application like Solar Station Laptop.
Distant monitoring is possible With all the EPEVER WiFi module.
six. Troubleshooting Prevalent Troubles
Problem one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Defense
Verify the solar array’s voltage ranking.
Alter system parameters if needed.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT settings in the menu.
Advantages of the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes sure:
Greater Performance: Decreased Electricity losses throughout conversion.
Increased Trustworthiness: Secure overall performance less than variable masses.
For a longer period Battery Lifestyle: Reliable and precise charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technological innovation is an Extraordinary choice for optimizing solar energy technology and extending battery daily life. By following the above mentioned setup information, buyers can make sure greatest performance and method longevity.